800.660.0809 // 806.372.8300

Health Hazard
1

Fire Hazard
1

Physical Hazard
0

Personal Protection
B

SciCron Technologies, LLC

MATERIAL SAFETY DATA SHEET


NFPA RATING

         SciCron Technologies, LLC

 

SAFETY DATA SHEET

 

1. IDENTIFICATION

 PRODUCT NAME:
 
Trim Fluid™                                                                                                    SDS NUMBER:   SC-004-SDS

 GENERIC NAME: Static Dissipative Coating Fluid                                        DATE ISSUED:   August 6, 2015

 MANUFACTURER: SciCron Technologies, LLC                         MANUFACTURER PHONE:   806-372-8300

 ADDRESS: 501 Amarillo Blvd. West                                              MANUFACTURER FAX:   806-372-8333

 CITY, STATE, ZIP: Amarillo, TX 79107                           EMERGENCY (PLANT MANAGER):   806-372-8300

 

2. HAZARDS IDENTIFICATION

 

GHS Classification:                Flammable Liquids (Category 2), H225
                                                Eye Irritation (Category 2A), H319
                                              Specific target organ toxicity – single exposure (Category 3), Central Nervous System, H336

 

GHS Label Elements:Signal Word:                             Warning

 

Hazard Statements:                  If fine particles are generated during further processing handling or by other means, product may form combustible dust concentrations in air.

 

3. COMPOSITION/INFORMATION ON INGREDIENTS

 

Chemical Characterization: 99-100% Polymethyl methacrylate (PMMA) CAS# 9010-88-2

 

 

4. FIRST AID MEASURES

 

 

Most Important Symptom(s)/Effect(s)

Acute: Contact with heated material can cause thermal burns. Gases and fumes evolved during the thermal processing or decomposition of this material may irritate the eyes, skin, or respiratory tract.

 

 

INHALATION:  In case of accidental inhalation of dust or fumes from overheating or combustion, move to fresh air.

 

EYE CONTACT:  Flush with large amounts of water until irritation subsides.

 

SKIN CONTACT:  If molten material contacts skin, cool rapidly with cold water and obtain medical attention for thermal burn. 

 

INGESTION:  This material is not expected to be absorbed within the gastrointestinal tract, so induction of vomiting should not be necessary.

 

Page 1 of 4

SC-001-SDS

5. FIRE FIGHTING MEASURES

 

Suitable Extinguishing Media: Carbon dioxide, dry chemical, or water.

 

Specific Fire Hazards: This product is a combustible thermoplastic material that burns vigorously with intense heat.

 

Fire Fighting Procedure: Firefighters should be equipped with self-contained breathing apparatus to protect against potentially toxic and irritating fumes.

 

Unusual Fire/Explosion Hazards: Toxic and irritating gases/fumes may be given off during burning or thermal decomposition. Avoid generating dust: fine dust dispersed in air in sufficient concentrations and in the presence of an ignition source is a potential dust explosion hazard.

 

6. ACCIDENTAL RELEASE MEASURES

 

SPILL OR LEAK PROCEDURES:  If molten, allow material to cool and place into an appropriately marked container for disposal. Sweep up and shovel into suitable containers for disposal. Dust deposits should not be allowed to accumulate on surfaces, as these may form an explosive mixture as they are released into the atmosphere in sufficient concentrations. Avoid dispersal of dust in the air.

 

7. HANDLING AND STORAGE

 

STORAGE TEMPERATURE:  Store in well ventilated areas at temperatures below 190ºF (88ºC).

 

HANDLING: Ensure appropriate exhaust and ventilation at machinery and at places where dust can be generated. Avoid dust formation. Prohibit sources of spark and ignition, such as smoking. Processing of this product under high temperatures will cause hazardous emissions of vapors, carbon monoxide, or carbon dioxide.

 

STORAGE: If this material is stored under ambient temperature conditions, it is not hazardous. However, extensive storing at higher than the maximum temperature will emit vapors, carbon monoxide, or carbon dioxide.

 

8. EXPOSURE CONTROLS/PERSONAL PROTECTION

 

EXPOSURE LIMITS: Not applicable

 

VENTILATION MEASURES: Provide good ventilation and/or an exhaust system in the work area.

 

EYE PROTECTION:  Wear safety goggles if splashing or spraying is expected.

 

RESPIRATORY PROTECTION:  None required under normal conditions.

 

HAND PROTECTION: Canvas or cotton gloves.

 

SKIN PROTECTION:  No special skin protection requirements during normal handling and use.

 

OTHER PROTECTIVE MEASURES:     Avoid contact of molten material with skin. Do not inhale dust particles or vapors. Keep away from sources of ignition.

 

HYGENIC PRACTICES:  Wash thoroughly before meals, breaks, and at the end of work period. Do not use abrasive soaps or solvents.

 

9. PHYSICAL AND CHEMICAL PROPERTIES

 

PHYSICAL FORM:       Solid

APPEARANCE:            Translucent sheet

COLOR:                       Gray

ODOR:                         Not applicable

Page 2 of 4

SC-001-SDS

 

 

pH:                               Not applicable

Melting Point:               300F (150 C)

BOILING POINT:         Not available

FLASH POINT:            689F (365C)

DECOMPOSITION TEMPERATURE: Not available

AUTO-IGNITION TEMPERATURE: 833F (445C)

EXPLOSION LIMITS:   Not Applicable

EVAPORATION RATE: Not Applicable

VAPOR PRESSURE:    Not applicable

VAPOR DENSITIY:      Not Applicable

RELATIVE DENSITY:   1.19

SOLUBILITY IN WATER: Insoluble

 

10. STABILITY AND REACTIVITY

 

STABILITY:  Product is stable under normal conditions.

 HAZARDOUS POLYMERIZATION:  Will not occur.

 INCOMPATIBILITIES: None under normal conditions

 DECOMPOSITION PRODUCTS:  Carbon Monoxide & Carbon Dioxide from burning.  When heated to decomposition, vapors can react with oxidizing materials forming strong acrid fumes.

 CONDITIONS TO AVOID:  Protect from excessive heat. Keep away from sources of ignition and heat. Avoid dust formation.

 

11. TOXICOLOGICAL INFORMATION

 

This product should not be harmful under normal conditions of use.

 

INHALATION:              Unlikely to be harmful by inhalation under ambient temperature. Inhalation of vapors from heated product can cause nausea, headache, dizziness as well as irritation of lungs, nose, and throat.

 SKIN CONTACT:         Possible skin irritation. Contact with molten material can result in burns.

 INGESTION:                Unlikely to be harmful by ingestion under ambient temperature.

 EYE CONTACT:           Vapors from heated product can irritate the eyes.

 CARCINOGENITY:       Non-carcinogenic

12. ECOLOGICAL INFORMATION

 

This product is a solid, inert product with low volatility, and is essentially insoluble in water.

 ECOTOXICITY:                        This product should have low toxicity to aquatic and terrestrial organisms.

 MOBILITY:                   Due to the solid nature of this product, it should have low mobility in soil.

 PERSISTANCE & DEGRADABILITY:   This product is non-biodegradable.

 BIOACCUMULATION: This solid product has a low potential for bioaccumulation.

 EFFECT IN SEWAGE PLANTS:           May be separated mechanically.

 

  

Page 3 of 4

SC-001-SDS

 

 

1`DISPOSAL CONSIDERATIONS

 

Waste disposal should be in accordance with all federal, state, and local environmental laws and regulations.

 

14. TRANSPORTATION INFORMATION

 

Not subject to national and international regulations on the transport of dangerous goods.

 

15. REGULATORY INFORMATION

 

OSHA HAZARD COMMUNICATION:                Non-hazardous

TOXIC SUBSTANCES CONTROL ACT:           Listed

CERCLA HAZARDOUS

SUBSTANCES (40CFR302):                 None

SARA SECTION 311/312:                                 Non-hazardous

SARA SECTION 302 EXTREMELY

            HAZARDOUS SUBSTANCES

            (40CFR355, Appendix A):                    None

SARA SECTION 313 TOXIC CHEMICALS

            (40CFR372.65):                                    None

RCRA HAZARDOUS WASTES

(40CFR261):                                         When this product becomes a waste, it is identified as a solid but NOT hazardous waste under RCRA criteria (40CFR Part 261)

CANADIAN WHMIS:                                        None

                                                                                                           

 

16. OTHER INFORMATION

 

HMIS Rating:                Health = 1         Flammability = 1           Physical Hazard = 0

 

SDS Prepared By: Scicron Technologies Laboratory, D. Hinders

SDS Original Date of Preparation: May 27, 2015

SDS Revision Date: N/A, new document

 

AS OF THE DATE OF THIS DOCUMENT, THE FOREGOING INFORMATION IS BELIEVED TO BE ACCURATE AND IS PROVIDED IN GOOD FAITH TO COMPLY WITH APPLICABLE FEDERAL AND STATE LAWS.  HOWEVER, NO WARRANTY OR REPRESENTATION OF LAW OR FACT, WITH RESPECT TO SUCH INFORMATION, IS INTENDED OR GIVEN.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Page 4 of 4

SC-001-SDS