|
|
| Health Hazard | 0 |  | | Fire Hazard | 1 | | | Physical Hazard | 0 | | | Personal Protection | A |
|
HMIS RATING
| SciCron Technologies, LLC
MATERIAL SAFETY DATA SHEET |
 |
| NFPA RATING |
|
Click Icon to Download Document |
SECTION I - PRODUCT AND COMPANY IDENTIFICATION
|
TRADE NAME: TMF-300™ Check Film
GENERIC NAME: Static Dissipative Polyester Film
MSDS NUMBER: SC-008
DATE ISSUED: April 23, 2004
MANUFACTURER: SciCron Technologies, LLC
ADDRESS: 501 Amarillo Blvd. West
CITY, STATE, ZIP: Amarillo, TX 79107
MANUFACTURER PHONE: 806-372-8300
MANUFACTURER FAX: 806-372-8333
EMERGENCY (PLANT MANAGER): 806-372-8300
|
SECTION II - COMPOSITION/INFORMATION ON INGREDIENTS
|
| CHEMICAL NAME |
CAS NUMBER |
WT % |
TLV |
PEL |
| |
|
|
|
|
| Polyethylene Terephthalate |
25038-59-9 |
> 90 |
None |
None |
| Tin Oxide |
18282-10-5 |
< 4.0 |
2 mg/m3 (as SN) |
2 mg/m3 (as SN) |
SECTION III - HAZARDS IDENTIFICATION
|
EMERGENCY OVERVIEW: There are no significant health hazards associated with exposure to this product. All ingredients are physically bound in the matrix during the manufacturing process and are not expected to create an exposure to individual components when the product is handled, processed, and used in its normal applications.
Burning: Toxic gases and fumes are given off during burning or thermal decomposition. Burning produces intense heat and dense smoke.
SIGNS AND SYMPTOMS OF OVEREXPOSURE: Overexposure to this product is not likely to cause any significant acute effect.
| HMIS RATING: |
Health: 0 |
Fire: 1 |
Physical Hazard: 0 |
Personal Protection: A |
POTENTIAL HEALTH EFFECTS:
- ROUTES OF ENTRY: Not applicable
- ACUTE EFFECTS: Acute effects are unlikely.
- CHRONIC EFFECTS: Chronic effects are unlikely.
- MEDICAL CONDITIONS AGGRAVATED BY EXPOSURE: Not applicable.
- CARCINOGENICITY: This product is not classified or regulated by NTP, IARC, or OSHA.
|
SECTION IV - FIRST AID MEASURES
|
No first aid measures are anticipated in normal use and application.
|
SECTION V - FIRE FIGHTING MEASURES
|
| NFPA RATING: |
Health: 0 |
Fire: 1 |
Reactivity: 0 |
Other: -- |
FLASH POINT AND METHOD: Not applicable.
EXTINGUISHING METHOD: Water spray, dry chemical and foam. Carbon dioxide may permit re-ignition due to lack of cooling capacity.
NFPA FIRE FIGHTING PROCEDURES: Use water spray or foam applied from a safe distance to avoid exposure to hazardous vapors and other decomposition products.
FIRE OR EXPLOSION HAZARDS: Product is a combustible thermoplastic film. Because of the potential for dense smoke in a fire situation, fire fighters should wear approved self-contained breathing apparatus.
HARMFUL COMBUSTION PRODUCTS: Intense heat, smoke, irritating toxic gases, and aerosols, including carbon dioxide, carbon monoxide, hydrocarbon fragments, and metal oxides may be generated by thermal decomposition when the product undergoes combustion.
|
SECTION VI - ACCIDENTAL RELEASE MEASURES
|
SPILL OR LEAK PROCEDURES: Sweep or pick-up fabrication debris. Debris may usually be disposed of in a non-regulated landfill. However, prior to disposal, it is recommended that the regulations in effect for the particular area where disposal is to take place be checked to prevent improper disposal.
|
SECTION VII - HANDLING AND STORAGE
|
STORAGE TEMPERATURE: Store in well ventilated areas at temperatures below 120° F (49° C).
SPECIAL SENSITIVITY: None
HANDLING PRECAUTIONS: Not applicable.
|
SECTION VIII - EXPOSURE CONTROLS/PERSONAL PROTECTION
|
EYE PROTECTION: Not normally required.
SKIN PROTECTION: Not normally required.
RESPIRATORY PROTECTION: Not normally required.
|
SECTION IX - PHYSICAL AND CHEMICAL PROPERTIES
|
PRODUCT USES: Static control film for check templates, separators, and OEM applications.
PHYSICAL FORM: Clear plastic film.
Weight per Square Foot: 14 grams
MELTING POINT: Not applicable
SOFTENING POINT: Not applicable
|
SECTION X - REACTIVITY
|
STABILITY: Product is stable under normal conditions.
HAZARDOUS POLYMERIZATION: Will not occur.
INCOMPATIBILITIES: None in designed use.
DECOMPOSITION PRODUCTS: Burning or thermal decomposition may generate carbon monoxide, carbon dioxide, hydrocarbons and metal oxides.
CONDITIONS TO AVOID: Exposure to high temperatures and direct flame.
|
SECTION XI - TOXICOLOGICAL INFORMATION
|
TOXICOLOGICAL HAZARDS: There are no reported toxicological hazards associated with this product.
|
SECTION XII - ECOLOGICAL INFORMATION
|
ECOLOGICAL INFORMATION: No data available.
|
SECTION XIII DISPOSAL CONSIDERATIONS
|
Product is non-hazardous. It may be incinerated or disposed of in a landfill in compliance with federal, state and local environmental regulations. Check before disposal to determine the details of such regulations in your area.
|
SECTION XIV - TRANSPORTATION CONSIDERATIONS
|
DOT NAME: Not regulated
DOT LABEL: Not applicable
DOT HAZARD CLASS: Not applicable
UN/NA NUMBER: None
PACKAGING GROUP: None
FLAMMABILITY CLASS: None
|
SECTION XV - REGULATORY INFORMATION
|
OSHA STATUS: This product is not considered hazardous under OSHA criteria (see Section II).
TSCA STATUS: Components of this product are included in the TSCA inventory.
CERCLA REPORTABLE QUANTITY: Not applicable.
SARA TITLE III
SECTION 302 EXTREMELY HAZARDOUS: This product contains no extremely hazardous substances
as defined and listed in section #302.
SECTION 311/312 HAZARDOUS CATEGORIES: Not reportable under this section.
SECTION 313 TOXIC CHEMICALS: Not reportable under this section.
|
SECTION XVI - APPROVALS
|
REASON FOR ISSUE: General Update
PREPARED BY: Jack Clifford
APPROVAL DATE: April 23, 2004
SUPERSEDES DATE: June 1, 2000
|
SECTION XVII - DISCLAIMER
|
AS OF THE DATE OF THIS DOCUMENT, THE FOREGOING INFORMATION IS BELIEVED TO BE ACCURATE AND IS PROVIDED IN GOOD FAITH TO COMPLY WITH APPLICABLE FEDERAL AND STATE LAWS. HOWEVER, NO WARRANTY OR REPRESENTATION OF LAW OR FACT, WITH RESPECT TO SUCH INFORMATION, IS INTENDED OR GIVEN.
|
|
| |
